Application of floor grinder: thin coated epoxy floor, epoxy mortar floor, epoxy self leveling floor, epoxy antistatic floor, garage ramp dedicated floor, and other personalized dedicated floor. The floor grinder has a wide range of applications. Generally, it is not necessary to select different floor grinders according to different epoxy floors for construction.
In order to help the customers who use the floor decoration protective coating to correctly select the type of floor grinder and effectively control the construction cost, it is suggested that the customers should start with the following factors:
The performance requirements of the floor grinder are mainly as follows:
1. Wear resistance: which vehicles will walk when the floor is used?
2. Pressure resistance: how much load will the floor bear when it is used?
3. Impact resistance: will the impact force cause the floor to peel off?
The chemical performance requirements of epoxy floor are as follows:
1. Acid and alkali resistance: the type and concentration of corrosive chemicals in use.
2. Solvent resistance: type of solvent and contact time. According to the location of the floor, is it necessary to deal with or select a special damp proof floor?
Base surface condition:
1. Base strength: generally required compressive strength ≥ 20mpa
2. Flatness: whether it needs to be repaired with epoxy mortar? 3. Self leveling treatment is generally required before ground construction.
Aesthetic requirements
1. Color requirements: is it necessary to divide the area by color?
2. Brightness requirements: whether to choose matte or bright?
3. Flatness requirements: whether there is a slope or to make a ponding arc.
Due to the different requirements of different floors of customers, there are also differences in the construction scheme of the floor grinder, which is mainly operated according to the actual situation.
