|
Model |
PB270 |
|
Voltage |
380V,50HZ, three phases |
|
Main Power |
11Kw |
|
Working width |
270mm |
|
Cleaning efficiency on concrete |
>150㎡/h |
|
Recycle mode |
Automatic recovery |
|
Walking speed |
0.5-20m/min |
|
Mode of operation |
Horizonal walking by itself |
|
Overall dimension |
2050*500*1460mm |
|
Dust collector model |
XC0408D |
|
Voltage |
380V,50HZ, three phases |
|
Main Power |
6.2kw |
|
Connection hose diameter |
150mm |
|
Airflow |
1250m³/h |
|
Counter-blowing |
Pulse blow |
|
Filter canister number |
5pcs |
|
Dimension |
1860*880*1450mm |
Shot blasting machine for cleaning floor, Removes markings, dirt and old coatings,Cleans factory and warehouse floors and clean and remove rust, paint on ship steel deck,clean the inside and outside of large oil tank surface and platforms, clean the concrete surface of bridge, tunnel and highway and brick and stone surface. It is a kind of floor cleaning machine that throws the shot abrasive to the working surface at high speed and certain angle through mechanical method. the negative pressure generated by the dust collector will recover dust through air flow cleaning, and the abrasive shot material will be recycled automatically, The reuse of shot materials can save resources and cost for large size floor surface preparation and cleaning project
Hot Tags: shot blasting machine for cleaning floor surface, China shot blasting machine for cleaning floor surface manufacturers, suppliers, factory, manual abrasive blasting machine, abrasive blasting machine dust collector, shot blasting machine switch, shot blasting machine cylinder, blast cleaning machine spare parts, blast cleaning machine motor
