|
Model |
PB550 |
|
Voltage |
380V,50HZ, three phases |
|
Main Power |
11Kw*2 Siemens motor |
|
Working width |
550mm |
|
Cleaning efficiency on concrete |
>300㎡/h |
|
Recycle mode |
Automatic recovery |
|
Walking speed |
0-50m/min |
|
Mode of operation |
Horizonal walking by itself |
|
Overall dimension |
2050*720*1460mm |
|
Dust collector Voltage |
380V,50HZ, three phases |
|
Main Power |
6.2kw |
|
Connection hose diameter |
150mm |
|
Airflow |
1250m³/h |
|
Counter-blowing |
Pulse blow |
|
Filter canister number |
8pcs |
|
Dimension |
1860*880*1450mm |
Epoxy floor shot blaster adopts walk behind shot blasting system with long service life and large rate abrasive flow.used to remove paint, pitch and floating oil and clean highways, airport runways, ship board, oil tank and bridges and other large asphalt surfaces. It is electrically-powered,self-propelled and offers variable travel speed control to provide a consistent blast pattern. The concrete dust is recovered by a powerful dust collection system. The dust collector removes pulverized abrasive, dust and contaminants. Very little abrasive is lost and the usable media is returned to the storage hopper for recirculation by the blast wheel.
Hot Tags: epoxy floor shot blaster, China epoxy floor shot blaster manufacturers, suppliers, factory, shot blasting machine switch, abrasive blasting machine dust collector, manual abrasive blasting machine, blast cleaning machine motor, blast cleaning machine spare parts, abrasive blasting machine belt
