|
Model |
PB850 |
|
Voltage |
380V/50HZ, three phases |
|
Main Power |
15kw*2 motors |
|
Working width |
850mm(33”) |
|
Cleaning efficiency on concrete |
600㎡/h |
|
Recycle mode |
Automatic recovery |
|
Walking speed |
0-50m/min |
|
Mode of operation |
Horizonal walking by itself |
|
Rated power |
40kw |
|
Weight |
790kg |
|
Size |
1900*980*1200mm |
|
Dust collector Voltage |
380V,50HZ, three phases |
|
Vacuum motor Power |
7.5kw |
|
Air compressor power |
3kw |
|
Connection hose diameter |
200mm |
|
Airflow |
1500m³/h |
|
Counter-blowing |
Pulse blow |
|
HEPA Filter canister number |
11pcs |
|
Weight |
580kg |
Road shot blasting machine is extremely efficient when resurfacing industrial plants, parking garages and other commercial concrete floors and steel decks, Shot blasting can lightly clean or remove as much as a quarter inch of concrete depending on the size of the abrasive and duration of blasting. the steel shot blasts dirt, grime, old coatings, and embedded chemical contaminants from the concrete floor, they are continuously recycled and the pulverized concrete and contaminants are collected in the connected dust collector.
Hot Tags: road shot blasting machine, China road shot blasting machine manufacturers, suppliers, factory, shot blasting machine switch, abrasive blasting machine dust collector, manual abrasive blasting machine, shot blasting machine cylinder, abrasive blasting machine belt, blast cleaning machine motor
